Start of script TSIM
  --------------------
 
 Reading command line options from file gen_conf
 
arguments valid for this calculation
Input file  = /home/ip/gensys/gensys.0503/verif/tutorial/vhe_bobo/G_runf/R400stiff.tsimf
Ident       = R400stiff
addarg      = yes       Prompt the user for more arguments
debug       = no        Save temporary files after execution
nohup       = no        Run program CALC immune to hangups under nohup
overwrite   = no        Overwrite old results without prompting the user
qident      = no        Ask user for an identification of this case
qread_runf  = no        Ask user for opening [Inputdatafile] in an editor
queue       = no        Define queue in a queue system
save_expf   = no        Save a copy of the expanded runf-file
save_runf   = no        Save a copy of the generated runf-file
 
Add more arguments ? (if not, reply with "return", q=quit)
Prefix no_ can be given in front of each option above
<cr>


  
 Start  of  program  TSIM    rel.0503
 ====================================
 
 Reading command line options from file gen_conf
 
arguments valid for this calculation
-no_qident -no_qread_runf -overwrite -qident -no_qread_runf G_kpff/create_kpfr.kpff create_kpfr
 
  Ident create_kpfr will be overwritten due to option -overwrite
 
 
 Start  of  program  KPF  rel.0503
 =================================
 
             EOF on file   5 has been read
 
 -- Info --  Distance between track center line and flange contact point
             Right rail=  717.48
             Left  rail=  717.48
 
 -- Info --  Roll angle due to static axle bending 
             of measured wheels  0.000000E+00
 
 -- Info --  Roll angle due to static axle bending  0.000000E+00
             Lateral displacement due to static axle bending 0.000000E+00
 
 GENSYS-results         has been written to file: G_kpfr/create_kpfr.kpfr
 
   End  of  KPF  main  program. 
 ============================== 
 
 
 
  Start of script NPICK
  ---------------------

  Start of calculation.
  /home/ip/gensys/gensys.0503/exe/npick < R400stiff.innpick
  
  
 Start  of  program  NPICK    rel.0503
 =====================================
  
             EOF on file   5 has been read
             EOF on file   5 has been read
             EOF on file  13 has been read
             EOF on file  14 has been read
             EOF on file  15 has been read
             EOF on file  14 has been read
             EOF on file  14 has been read
                                                                                
 Func print06_init       gauge_average           =   1.43500E+03

 
 -- INFO  -- In Patr_c:
             Searching for couplings
 
 -- INFO  -- In Patr_f:
             Searching for functions
 
 -- INFO  -- In Patr_b:
             Searching for bodies

 * warning * In Patr_b:
             Modal results for result point 111  must be extrapolated from
             following nodes:     13     20     12     54

 * warning * In Patr_b:
             Modal results for result point 112  must be extrapolated from
             following nodes:     13     20     12     54

 * warning * In Patr_b:
             Modal results for result point 711  must be extrapolated from
             following nodes:      1     14      2     54

 * warning * In Patr_b:
             Modal results for result point 712  must be extrapolated from
             following nodes:      1     14      2     54

 Output results         has been written to file: G_npickr/R400stiff.npickr

 Messages               has been written to file: G_npickm/R400stiff.npickm

 NODE_INTPL commands    has been written to file: G_npicki/R400stiff.npicki
  
  End    of  program  NPICK
  =========================
  
 
 
  Start of script QUASI
  ---------------------
 
 Reading command line options from file gen_conf
 
arguments valid for this calculation
Input file  = G_runf/R400stiff.tsimf
Ident       = R400stiff
addarg      = no        Prompt the user for more arguments
debug       = no        Save temporary files after execution
nohup       = no        Run program CALC immune to hangups under nohup
overwrite   = yes       Overwrite old results without prompting the user
qident      = no        Ask user for an identification of this case
qread_runf  = no        Ask user for opening [Inputdatafile] in an editor
queue       = no        Define queue in a queue system
save_expf   = no        Save a copy of the expanded runf-file
save_runf   = no        Save a copy of the generated runf-file

  
  
 Start  of  program  QUASI   rel.0503
 ====================================
                                                                                
 Func print06_init       gauge_average           =   1.43500E+03

 * warning * In In_func1:
             Variable bo is already defined,
             will be overwritten by func const                   
 
 * warning * In In_copl1:
             Property kxbap_ is already defined,
             current values will be overwritten.
 
 * warning * In In_copl1:
             Property kybap_ is already defined,
             current values will be overwritten.

 Initial time =    0.91 [s]
 
  Quasistatic Solver Damped_Tens  iloop=    1
  Time integration  time,tstep,ferr=  0.0000E+00  1.0000E-04  2.4222E+01 car_1.v1      0.0000E+00  0.0000E+00
  Time integration  time,tstep,ferr=  2.0000E-01  3.2095E-04  1.7303E-01 car_1.v1      3.9097E-02  1.1793E+00
  Time integration  time,tstep,ferr=  4.0000E-01  6.0524E-04  1.6233E-02 bog_12.vx    -2.8767E-03 -5.3349E-03
  Time integration  time,tstep,ferr=  6.0000E-01  6.8621E-04  1.2874E-02 car_1.v1      5.4144E-02  1.2111E+00
  Time integration  time,tstep,ferr=  8.0000E-01  5.1285E-04  4.0446E-03 car_1.v1      2.5954E-02  1.2187E+00
  Time integration  time,tstep,ferr=  1.0000E+00  8.7360E-04  4.2799E-03 axl_122.vk    7.2789E-04  0.0000E+00
  Time integration  time,tstep,ferr=  1.2000E+00  8.6848E-04  3.4946E-03 axl_122.vk    4.2380E-04  0.0000E+00
  Time integration  time,tstep,ferr=  1.4000E+00  6.7342E-04  1.0224E-03 axl_122.vk    3.1346E-04  0.0000E+00
  Time integration  time,tstep,ferr=  1.6000E+00  6.4853E-04  1.4943E-03 axl_122.vk    2.2641E-04  0.0000E+00
  Time integration  time,tstep,ferr=  1.8000E+00  6.0913E-04  5.8977E-04 axl_122.vk    2.0563E-04  0.0000E+00
  Time integration  time,tstep,ferr=  2.0000E+00  7.4286E-04  1.2665E-03 axl_122.vk    1.7162E-04  0.0000E+00
  Time integration  time,tstep,ferr=  2.0007E+00  7.4286E-04  8.1008E-04 axl_122.vk    1.8075E-04  0.0000E+00
  Result                 ferr=                   2.47884E-11 car_1.v3                
 
 Quasistationary results has been written to MPdat-file: G_id/R400stiff.id
 
 Quasistationary results has been written to GPdat-file: G_gp/R400stiff.gp

 Processing time =      6.11 [s]
  
  End    of  program  QUASI
  =========================
  
                                                                                
 Func print06_init       gauge_average           =   1.43500E+03

 
 -- INFO  -- In Initval:
             opening filegp = G_gp/R400stiff.gp
 
 -- INFO  -- In Initval:
             reading deform no=      1
             time             =  0.0000E+00
 
 -- INFO  -- In Initval:
             closing filegp = G_gp/R400stiff.gp

 Initial time =   12.11 [s]
 Writing timestep  0.02   Tstep= 1.01E-03   (ready at 15:40)
 Writing timestep  0.52   Tstep= 1.03E-03   (ready at 15:40)
 Writing timestep  1.02   Tstep= 1.12E-03   (ready at 15:40)
 Writing timestep  1.52   Tstep= 1.21E-03   (ready at 15:40)
 Writing timestep  2.02   Tstep= 1.35E-03   (ready at 15:40)
 Writing timestep  2.52   Tstep= 1.55E-03   (ready at 15:40)
 Writing timestep  3.02   Tstep= 1.62E-03   (ready at 15:40)
 Writing timestep  3.52   Tstep= 9.64E-04   (ready at 15:40)
 Writing timestep  4.02   Tstep= 9.63E-04   (ready at 15:40)
 Writing timestep  4.52   Tstep= 9.27E-04   (ready at 15:40)
 Writing timestep  5.02   Tstep= 1.04E-03   (ready at 15:40)
 Writing timestep  5.52   Tstep= 9.19E-04   (ready at 15:40)
 Writing timestep  6.02   Tstep= 1.12E-03   (ready at 15:40)
 Writing timestep  6.52   Tstep= 9.91E-04   (ready at 15:40)
 Writing timestep  7.02   Tstep= 9.25E-04   (ready at 15:40)
 Writing timestep  7.52   Tstep= 9.88E-04   (ready at 15:40)
 Writing timestep  8.02   Tstep= 9.34E-04   (ready at 15:40)
 Writing timestep  8.52   Tstep= 9.36E-04   (ready at 15:40)
 Writing timestep  9.02   Tstep= 9.82E-04   (ready at 15:40)
 Writing timestep  9.52   Tstep= 9.22E-04   (ready at 15:40)
 
 Simulated results has been written to MPdat-file: G_id/R400stiff.id
 
 Simulated results has been written to GPdat-file: G_gp/R400stiff.gp

 Processing time =     20.54 [s]
 
 
  
  
 Start  of  program  MPLOT   rel.0503
 ====================================
 
 Print output data      has been written to file: G_mplotr/R400stiff.print
 
 Postscript data        has been written to file: G_diags/R400stiff.ps

 Result summary         has been written to file: G_mplotr/R400stiff.resu
  
  End    of  program  MPLOT
  =========================
  
 
  Temporary workfiles have been removed
 
done
  
  End    of  program  TSIM 
  =========================
  
done