Home    Reference Manuals    Return    Track Group Documentation

Users Manual for Program TRC_STRIX_TEST  

Table of Contents

Introduction

Program trc_strix_test reads a sra-file written by the STRIX-recording trolley, and tests which sections of the sra-file can be useful for reconstructing track irregularities. Program trc_strix_test writes a table showing the coordinates for all sections of the sra-file which can be used for later calculations in program trc_qnum_strix or trc_strix_track.

Input data

Input data is read in free format, valid separators between the input values are <space>, <comma>, <tab>, <equal sign> or <carriage return>. The commands can be written both in lower and upper case letters. The operation of the program is controlled by the commands described below; some of the commands also need arguments.

INFIL

STRIX-file in SRA-format.
Declared = Character*132    Default = Blank

V_LOW_LIMIT

Set the lower level of the speed, under which the data in the sra-file should be considered not useful.
Declared = Real*4    Default = 40.

Example of an input data file

Following example: Master.trc_strix_testf can be used as a master file:

                                                       
 ##                                                    
 ##      Input data for program trc_strix_test         
 ##                                                    
  INFIL = 85251257.sra                                 
 #                                                     
  V_LOW_LIMIT= 40.                                     
 #